Gemini Steel Gate Motor Rack 2m
Gemini Rack Steel Additional - 2m (S01960): plain black steel rack for any Gemini sliding gate motor, about 30 x 10mm and 4kg. Welds to the gate on angle iron brackets. End stoppers are mandatory and not included.
- 2mPer length
- About 4kg30 x 10mm section
- Weld-onNo screw holes
- Gemini slidersAny Gemini sliding motor
-
Alectra Hatfield 648 Jan Shoba Street, HatfieldMon to Fri 07:30 to 17:00, Sat 08:00 to 17:00Get directions
-
Alectra Wonderboom Braam Pretorius Street, WonderboomMon to Sun 08:00 to 16:45Get directions
Choose Pickup at checkout and we message you when your order is ready to collect.
This is Gemini's Rack Steel Additional - 2m (part S01960): one 2m length of plain black steel rack, about 30 x 10mm in section and about 4kg, for any Gemini sliding gate motor. It is a steel rack for gate motor installs where the rack is welded to the gate, so it has no screw holes. For a rack that screws on, see the nylon gate motor rack 2m. It suits Gemini sliders such as the Gemini 12V 7Ah.
Welding the rack to the gate
Gemini's fitting rules for this rack: weld it to the gate on angle iron brackets spaced no more than 600mm apart, and leave about 2mm play between the motor's pinion and the rack. End stoppers are mandatory. The angle iron brackets and end stoppers are not part of this listing. Alectra Solutions supplies the equipment only.
Steel rack or nylon rack for your gate motor?
This steel rack welds on. The nylon angle rack fixes with TEK screws through the holes in its angle, which suits a gate where you would rather not weld. Gemini lists this steel rack for any Gemini sliding gate motor but does not state the tooth module, so for another brand of motor, match the rack to the motor's pinion before you buy.
Plain steel, no stated finish
Gemini describes the rack as plain black steel and does not state a galvanised or other protective finish. Each length weighs about 4kg. If you are fitting a new motor, the Gemini 12V 12Ah is another Gemini slider this rack is listed for.
Key features
- Gemini steel rack. Gemini's Rack Steel Additional - 2m, part S01960.
- 2m length. About 2m x 30 x 10mm and about 4kg.
- Welds to the gate. Fixed on angle iron brackets no more than 600mm apart. No screw holes.
- About 2mm play. Gemini's gap between the pinion and the rack.
- For Gemini sliders. Gemini lists it for any Gemini sliding gate motor.
- Plain black steel. Gemini does not state a protective finish.
Specifications
| Gemini name | Rack Steel Additional - 2m |
|---|---|
| Gemini part number | S01960 |
| Material | Plain black steel (no finish stated by Gemini) |
| Length | About 2m |
| Section | About 30 x 10mm |
| Weight | About 4kg |
| Fixing | Welded to the gate on angle iron brackets (no screw holes) |
| Bracket spacing | No more than 600mm apart |
| Pinion to rack play | About 2mm |
| End stoppers | Mandatory, not included |
| Fits | Any Gemini sliding gate motor |
| Sold as | One 2m length |
Not in the box
- Angle iron brackets
- End stoppers (Gemini says these are mandatory)
- Gate motor
Manuals and documents
Questions people ask
Gemini lists it for any Gemini sliding gate motor. Gemini does not state the tooth module, so for another brand, match it to the motor's pinion first.
No. It is plain black steel, and Gemini does not state a protective finish.
It has no holes. It is made to be welded to the gate on angle iron brackets. For a screw-on option, look at the nylon gate motor rack.
No more than 600mm apart, per Gemini.
About 2mm of play, per Gemini.
Yes. Gemini says end stoppers are mandatory. They are not included with the rack.
No. Alectra Solutions supplies the equipment only.
Need it fitted? Alectra Solutions supplies product only. Ask the branch and we will point you to installers in Pretoria.