Nemtek Electric Fence Warning Sign, Yellow, Double-Sided, 200 x 100mm
One Nemtek electric fence warning sign: yellow UV-stabilised plastic, black writing on both sides, 200 x 100mm, four quick-fit wire clips. SANS 10222-3, per Nemtek's installer manual, calls for signs at every gate and access point and no more than 10m apart.
- 200 x 100mmSign size
- Double-sidedBlack writing on both sides
- 4 clipsQuick-fit, fit most wire sizes
- 10mMaximum spacing (SANS 10222-3)
-
Alectra Hatfield 648 Jan Shoba Street, HatfieldMon to Fri 07:30 to 17:00, Sat 08:00 to 17:00Get directions
-
Alectra Wonderboom Braam Pretorius Street, WonderboomMon to Sun 08:00 to 16:45Get directions
Choose Pickup at checkout and we message you when your order is ready to collect, usually within 24 hours. You can pay online, or pay at the branch when you collect.
Nemtek's yellow electric fence warning signs clip straight onto the fence wire: 200 x 100mm, UV-stabilised plastic, black writing on both sides, with four quick-fit clips that fit most wire diameters and stop the sign flapping or moving in the wind. Nemtek's installer manual quotes SANS 10222-3 on where they go: at every gate, at every other access point, and no more than 10m apart along the fence. This listing is for one sign, so the price shown is per sign; work out how many you need from your fence length and gates.
How many signs do you need
Divide the fence length by 10 and round up, then add one for every gate and access point. A 60m fence with one gate needs at least 7 signs; a 120m perimeter with two gates needs at least 14. Round up rather than down.
What the rule says
Nemtek's Merlin Stealth installer manual sets out the SANS 10222-3 requirements for warning signs: at least 100 x 200mm, yellow on both sides, with indelible black lettering at least 25mm high, fitted at every gate and access point and at intervals of no more than 10m. This Nemtek sign is 200 x 100mm, yellow, with black writing on both sides, and Nemtek describes the design as IEC 60335-2-76 compliant. Nemtek does not state the letter height. The installer who certifies the fence checks that the signs are in place.
Fitting it
The four quick-fit clips snap onto the fence wire. Nemtek says they fit most wire diameters and are there to prevent flapping and movement in the wind. Black cable ties are handy for tidying the HT cable near the signs.
Nemtek-branded, or plain
This sign carries the Nemtek name. If you would rather have a sign without a manufacturer's name on it, see our Danger Electric Fence warning sign. Nemtek also makes custom-printed versions on request, screen or pad printed, with minimum order quantities. Either way, signs are only one part of a compliant fence. The fence and its mains connection must be installed and certified by a registered electric fence installer, who issues the electric fence system certificate. Alectra supplies the equipment only.
Key features
- Sold singly. One sign per unit, so buy exactly the number your fence needs.
- Yellow with black writing on both sides. Readable from inside and outside the fence.
- UV-stabilised plastic. Made to stay out in the sun on the fence.
- Four quick-fit clips. Snap onto the fence wire, fit most wire diameters and prevent flapping and movement in the wind.
- 200 x 100mm. The same size as the 100 x 200mm minimum that SANS 10222-3 calls for, per Nemtek's installer manual.
- IEC 60335-2-76 compliant design. Nemtek's own description of the sign.
- Nemtek-branded. Carries the Nemtek name; a plain sign is also available from us.
Specifications
| Nemtek name | Warning Sign |
|---|---|
| Nemtek code | EA-WRS2/N |
| Size | 200 x 100mm |
| Material | UV-stabilised plastic |
| Colour | Yellow with black writing |
| Printed | Both sides |
| Fixing | Four quick-fit clips, fit most wire diameters |
| Design | IEC 60335-2-76 compliant (Nemtek) |
| Placement rule | Every gate and access point, no more than 10m apart (SANS 10222-3, per Nemtek's installer manual) |
| Sold as | Each (one sign with its four clips) |
Manuals and documents
Questions people ask
No more than 10m apart, plus one at every gate and access point, according to SANS 10222-3 as quoted in Nemtek's installer manual.
Divide your fence length by 10, round up, and add one per gate and access point. A 60m fence with one gate needs at least 7.
At least 100 x 200mm, yellow on both sides, with black lettering at least 25mm high, per the SANS 10222-3 requirements in Nemtek's installer manual. This sign is 200 x 100mm; Nemtek does not state its letter height.
Singly. The price shown is per sign.
Yes. Black writing on yellow on both sides, so it reads from inside and outside the fence.
Four quick-fit clips snap onto the fence wire. Nemtek says they fit most wire diameters and prevent the sign flapping or moving in the wind.
Nemtek does not state the wording on its product page, so we do not quote it here. Ask the branch if you need to know before you order.
The Electrical Machinery Regulations require an electric fence to comply with the applicable standard and to be certified, and Nemtek's installer manual quotes SANS 10222-3 for the sign requirements. Your registered installer certifies the fence; Alectra supplies the signs only.
Need it fitted? Alectra Solutions supplies product only. Ask the branch and we will point you to installers in Pretoria.