By Nemtek

Nemtek 1.6mm Solid Aluminium Alloy Electric Fence Wire 1000m

Nemtek 1.6mm solid aluminium alloy electric fence wire, 1000m roll. 27 ohm/km, 60 to 70kg breaking strength, 10 to 11% elongation. Low resistance for longer fences; good corrosion resistance 5km or more from the coast.

  • 1000mRoll length
  • 27 ohm/kmResistance
  • 60 to 70kgTensile breaking strength
  • 1.6mmSolid aluminium alloy
Sale price R 898.00 Regular price R 999.00
Collect at a branch, no charge
  • Alectra Hatfield 648 Jan Shoba Street, HatfieldMon to Fri 07:30 to 17:00, Sat 08:00 to 17:00
    Get directions
  • Alectra Wonderboom Braam Pretorius Street, WonderboomMon to Sun 08:00 to 16:45
    Get directions

Choose Pickup at checkout and we message you when your order is ready to collect, usually within 24 hours. You can pay online, or pay at the branch when you collect.

Nemtek 1.6mm solid aluminium electric fence wire on a 1000m roll: one solid strand of aluminium alloy rather than the twisted strands of the 1.6mm stranded aluminium wire. Nemtek rates it at 27 ohm/km, a tensile breaking strength of 60 to 70kg and 10 to 11% elongation. In Nemtek's words, the low electrical resistance allows for longer fences, and the alloy gives good corrosion resistance for most environments 5km or more from the coastline.

Solid or stranded aluminium?

Both are 1.6mm Nemtek aluminium alloy and both take the same ferrules, clamp and spring, so the choice is about the wire itself. The solid wire is a single strand with a published 60 to 70kg breaking strength. The stranded 1000m and stranded 500m rolls are several finer strands twisted together, the construction Nemtek describes as easy to work with.

Which fence wire do you need?

At 27 ohm/km this is one of the lowest resistance fence wires Nemtek makes, so it loses less voltage over a long run than the 1.2mm galvanised wire at 175 ohm/km or the 1.2mm 304 stainless steel wire at 700 ohm/km. Choose galvanised where you want a harder-to-cut steel wire on an inland fence, and stainless for corrosive environments or sites nearer the coast.

Joining and tensioning solid aluminium wire

Nemtek specifies its 6mm aluminium ferrules for permanent crimped joins on 1.6mm aluminium wire, and the 6mm bolt-type line clamp (wire up to 1.6mm) for a join you can undo. For tension, Nemtek rates the gold 8kg Hybrid Compression Spring 2 for 1.6mm aluminium; the silver 5kg Compression Spring 1 is for wire up to 1.2mm only. Link the spring to the insulator with a large tail spring hook.

Energizer and lead-out

Run the fence from a Nemtek Merlin Stealth M18S, Merlin Stealth M28S or Wizord 4i energizer. For the lead-out and earth connection, Nemtek lists its A-Series aluminium HT cable as the ideal cable when aluminium wire is used; we list Nemtek single core HT cable in 30m, 50m and 100m. The fence must be installed and certified by a registered electric fence installer. Alectra supplies the equipment only.

Courier anywhere in South AfricaR160 for orders up to 10 kg. Heavier orders are priced by weight at checkout. Free courier on orders of R8,000 or more, up to 10 kg.
Collect in Pretoria at no chargeChoose collection at checkout and pick up at Hatfield or Wonderboom.
Genuine stockSupplied through the official South African distributors, with the supplier warranty.
Key features
  • Low resistance for longer fences. Nemtek quotes 27 ohm/km and says the low electrical resistance allows for longer fences.
  • 60 to 70kg breaking strength. Nemtek's published tensile breaking strength for this wire, with 10 to 11% elongation.
  • One solid strand. A single 1.6mm strand of aluminium alloy, the alternative to Nemtek's stranded aluminium wire.
  • Aluminium alloy. Good corrosion resistance for most environments 5km or more from the coastline, in Nemtek's words.
  • Tension with the gold 8kg spring. Nemtek rates the Hybrid Compression Spring 2 for 1.6mm aluminium; the silver 5kg spring is for wire up to 1.2mm.
  • Crimps with 6mm aluminium ferrules. Nemtek's 6mm aluminium ferrules are made for 1.6mm aluminium wire. The 6mm bolt-type line clamp fits too.
  • Full 1000m roll. One roll, Nemtek code EW-AL16. Nemtek does not publish a roll weight.
Specifications
Wire typeSolid aluminium alloy, single strand
Diameter1.6mm
Roll length1000m
Resistance27 ohm/km
Tensile breaking strength60 to 70kg
Elongation10 to 11%
Corrosion resistanceGood for most environments, 5km or more from the coastline
Matching ferruleNemtek 6mm aluminium ferrules
Matching line clampNemtek 6mm bolt-type line clamp (wire up to 1.6mm)
Matching springHybrid Compression Spring 2, gold 8kg
Matching HT cableNemtek A-Series aluminium HT cable (Nemtek's recommendation with aluminium wire)
Nemtek codeEW-AL16
Sold asRoll of 1000m
Not in the box
  • Ferrules, line clamps and tensioner springs
  • HT cable for the lead-out and earth connection
  • Brackets and bobbin insulators
Manuals and documents
Questions people ask
What is the difference between solid and stranded aluminium fence wire?

Both are 1.6mm Nemtek aluminium alloy. The solid wire is one strand with a published 60 to 70kg breaking strength; the stranded wire is several finer strands twisted together, which Nemtek describes as easy to work with. Fittings are the same for both.

Why choose solid aluminium electric fence wire for a long fence?

Its resistance is 27 ohm/km, against 175 ohm/km for 1.2mm galvanised steel. Nemtek puts it plainly: low electrical resistance allows for longer fences.

How strong is it?

Nemtek rates the tensile breaking strength at 60 to 70kg with 10 to 11% elongation. On the fence it runs at the 8kg tension of the gold Hybrid Compression Spring 2 that Nemtek specifies for 1.6mm aluminium.

Which ferrules and clamp do I use?

Nemtek's 6mm aluminium ferrules for a permanent crimped joint, or the 6mm bolt-type line clamp (wire up to 1.6mm) for a join you can undo.

Is it corrosion proof?

No fence wire is. Nemtek gives this alloy good corrosion resistance for most environments 5km or more from the coastline; nearer the sea it recommends stainless steel wire.

How much fence does 1000m cover?

Divide by the number of lines. On a 6 line fence, 1000m covers roughly 166m of wall before tails, joins and springs; on 8 lines, roughly 125m.

Do I need an installer?

Yes. An electric fence must be installed and certified by a registered electric fence installer, who also issues the compliance certificate. Alectra supplies the wire, cable and fittings only.

Need it fitted? Alectra Solutions supplies product only. Ask the branch and we will point you to installers in Pretoria.

Ask HatfieldAsk Wonderboom