Kocom Audio Intercom Kit with Handset and Metal Gate Station, 220V
Kocom audio gate intercom kit: white KDP-601AM handset on 220V AC and an MS-2D metal gate station, joined by 2 wires up to 300m apart with 0.65mm wire. Chime, works with a door opener (sold separately).
- 2-wireHandset to gate station
- 300mWith 0.65mm wire
- 220V ACHandset power
- MetalMS-2D gate station
-
Alectra Hatfield 648 Jan Shoba Street, HatfieldMon to Fri 07:30 to 17:00, Sat 08:00 to 17:00Get directions
-
Alectra Wonderboom Braam Pretorius Street, WonderboomMon to Sun 08:00 to 16:45Get directions
Choose Pickup at checkout and we message you when your order is ready to collect.
This Kocom intercom is an audio kit for one gate: a white KDP-601AM handset for inside the house and an MS-2D metal gate station with a CALL button. The two are joined by just 2 wires, up to 300m apart with 0.65mm wire. The handset runs on 220V AC mains and sounds a chime when a visitor presses the button. Kocom states that the kit can be combined with a door opener, sold separately. It is a talk-only intercom; if you want a picture of the visitor, look at the ET Nice 7 inch colour intercom kit.
What's in the box
- 1 x Kocom KDP-601AM handset (220V AC)
- 1 x Kocom MS-2D metal gate station
- 1 x wall hanger
The cable, the door opener and the door opener's power supply are not included.
Wiring the Kocom intercom
The handset and the gate station connect on 2 wires, and the gate station takes its power from the handset over those same wires, so there is no separate supply at the gate. The wiring is polarity sensitive: each wire must go to the matching terminal at both ends. Kocom rates the run at up to 300m with 0.65mm wire, so measure the distance from the gate to the house and plan the cable with your installer.
Power and load shedding
The KDP-601AM runs on 220V AC mains and uses 0.5W on standby and 3.3W while you talk. Because it runs off the mains, it goes off during load shedding unless its supply is backed up. Kocom also makes a DC version, the KDP-601DM, which runs on 4 x 1.5V batteries or an external 12V DC supply; that is not this listing.
Adding a door opener
A door opener, such as an electric strike on a pedestrian gate, is sold separately. Kocom's manual does not give the output rating for it, so let your installer check the lock or strike against the handset before you buy one. The intercom is installed by your installer, and Alectra supplies the equipment only.
Key features
- Audio intercom for one gate. A handset inside the house and a gate station with a CALL button at the gate.
- Only 2 wires. The handset and the gate station connect on 2 wires, and the gate station is powered over them.
- Up to 300m. Kocom rates the run at up to 300m with 0.65mm wire.
- Runs on 220V AC. The KDP-601AM handset uses 0.5W on standby and 3.3W in use.
- Chime. The handset sounds a chime when a visitor presses the CALL button.
- Metal gate station. The MS-2D is Kocom's metal gate station; Kocom also makes a plastic one, the DS-2D, which is not in this kit.
- Works with a door opener. Kocom states the kit can be combined with a door opener, sold separately.
Specifications
| Model | Kocom KDP-601AM handset with MS-2D gate station |
|---|---|
| Type | Audio door phone, 1 handset and 1 gate station |
| Handset power | 220V AC |
| Power use | 0.5W standby, 3.3W in use |
| Wiring | 2-wire, polarity sensitive |
| Maximum distance | 300m with 0.65mm wire |
| Call signal | Chime |
| Door opener | Can be combined with a door opener (sold separately); output rating not stated |
| Gate station | MS-2D, metal, 1 CALL button |
| Gate station power | From the handset, over the 2 wires |
| Gate station size | 99 x 127 x 32mm |
| Handset colour | White |
| Warranty | 1 year limited (Kocom) |
| Sold as | 1 kit (handset, metal gate station and wall hanger) |
Not in the box
- Cable between the gate and the house
- Door opener (electric lock or strike)
- Power supply for the door opener
- Installation (done by your installer)
Questions people ask
No. This is an audio kit: you hear and talk to the visitor on the handset. If you want a picture of the visitor on a screen, see the ET Nice 7 inch colour intercom kit.
Kocom rates it at up to 300m with 0.65mm wire. Measure the run before you buy the cable.
Two wires between the handset and the gate station, connected the right way round because the wiring is polarity sensitive. Kocom's 300m figure is for 0.65mm wire. Cable is not included.
The KDP-601AM runs on 220V AC, so it goes off when the mains goes off unless its supply is backed up. Kocom's DC version, the KDP-601DM, is a different model and not this listing.
Kocom states the kit can be combined with a door opener, which is sold separately. The output rating is not given, so have your installer check the lock or strike before you buy it.
Metal. This kit has the Kocom MS-2D metal gate station. Kocom's plastic gate station, the DS-2D, is not in this kit.
No. Alectra supplies the equipment only. The intercom is installed by your installer.
Need it fitted? Alectra Solutions supplies product only. Ask the branch and we will point you to installers in Pretoria.